Engineering Aide
Salary undisclosed
Checking job availability...
Original
Simplified
Electro-Mechanical Engineering Aide need to fulfill requirements for program designs and fabricate equipment that will be used in the development and manufacture of tactical hardware. We are seeking career individuals who will be fabricating electronic, electro-mechanical assemblies (and sub-assemblies) to Engineering drawings. Fabrication will include the ability to place and solder components on circuit cards and sub-assemblies. The fabrication of wiring harnesses will require connector pinning, de-pinning and applying mounting hardware. In addition, these lower-level assemblies are to be built-up into single, or multi-bay cabinet assemblies, for the delivery to Engineering or Manufacturing Production areas. This position will provide the opportunity for the candidate to work as individual contributor, in a team environment. This would include collaborating with Engineers, and other members of the Fabrication team including other Fabricators, Draftsmen, Procurement, and Quality Inspectors. The position will be responsible for reading, interpreting, and occasionally correcting engineering drawings/schematics. Daily activity would include not only a fast-paced fabrication environment, but it would also include using several computer-based programs that will update job status, Quality Inspections, and Engineering changes.
This position is expected to operate under moderate supervision.
This position is a minimum of 40 hours per week commitment with occasional overtime required.
Required Experience
This position is expected to operate under moderate supervision.
This position is a minimum of 40 hours per week commitment with occasional overtime required.
Required Experience
- Must have at least 3 years of experience in electrical fabrication (cable and harness, SMT board, test equipment, etc.)
- Must have at least 3 years of experience with fabricate electrical test equipment designs from a blueprint of the layout, schematic, bill of material, and engineering practices manual as guidelines.
- Must have at least 3 years of experience in repairs of electro-mechanical assemblies
- Must have at least 3 years of experience with basic avionics and electronics
- Must have at least 3 years of experience with troubleshooting and fault isolation of components using general purpose and/or automated test equipment
- Must have at least 3 years of experience with automated and/or general-purpose test equipment (oscilloscopes, multi-meters, network analyzers and waveform generators)
- Must have at least 3 years of experience with interpretation of engineering drawings, schematics, and test and repair procedures
- Ability to communicate issues with the design and or the process requirements to management and or design engineers.
- Familiarity with industrial standards, military specifications, and industry processes
- Ability to lift 35 pounds.
- Ability to adapt to dynamic and frequently changing customer requirements
- Ability to understand policies and procedures for the control of Government property
- Ability to work with hazardous materials
- Ability to properly safety wire assemblies and connectors
- Ability to solder and repair cables and harnesses
- Basic knowledge of Microsoft Office suite of programs
- High school diploma
- Knowledge of solder certification to J-STD-001, IPC-7711/IPC-7721
- Knowledge of fault isolation for electro-mechanical components
- Knowledge of concepts for hardware repair
- Experience with CCA component rework and repair
- Rework experience with BGAs and electrical maintenance and rework
Electro-Mechanical Engineering Aide need to fulfill requirements for program designs and fabricate equipment that will be used in the development and manufacture of tactical hardware. We are seeking career individuals who will be fabricating electronic, electro-mechanical assemblies (and sub-assemblies) to Engineering drawings. Fabrication will include the ability to place and solder components on circuit cards and sub-assemblies. The fabrication of wiring harnesses will require connector pinning, de-pinning and applying mounting hardware. In addition, these lower-level assemblies are to be built-up into single, or multi-bay cabinet assemblies, for the delivery to Engineering or Manufacturing Production areas. This position will provide the opportunity for the candidate to work as individual contributor, in a team environment. This would include collaborating with Engineers, and other members of the Fabrication team including other Fabricators, Draftsmen, Procurement, and Quality Inspectors. The position will be responsible for reading, interpreting, and occasionally correcting engineering drawings/schematics. Daily activity would include not only a fast-paced fabrication environment, but it would also include using several computer-based programs that will update job status, Quality Inspections, and Engineering changes.
This position is expected to operate under moderate supervision.
This position is a minimum of 40 hours per week commitment with occasional overtime required.
Required Experience
This position is expected to operate under moderate supervision.
This position is a minimum of 40 hours per week commitment with occasional overtime required.
Required Experience
- Must have at least 3 years of experience in electrical fabrication (cable and harness, SMT board, test equipment, etc.)
- Must have at least 3 years of experience with fabricate electrical test equipment designs from a blueprint of the layout, schematic, bill of material, and engineering practices manual as guidelines.
- Must have at least 3 years of experience in repairs of electro-mechanical assemblies
- Must have at least 3 years of experience with basic avionics and electronics
- Must have at least 3 years of experience with troubleshooting and fault isolation of components using general purpose and/or automated test equipment
- Must have at least 3 years of experience with automated and/or general-purpose test equipment (oscilloscopes, multi-meters, network analyzers and waveform generators)
- Must have at least 3 years of experience with interpretation of engineering drawings, schematics, and test and repair procedures
- Ability to communicate issues with the design and or the process requirements to management and or design engineers.
- Familiarity with industrial standards, military specifications, and industry processes
- Ability to lift 35 pounds.
- Ability to adapt to dynamic and frequently changing customer requirements
- Ability to understand policies and procedures for the control of Government property
- Ability to work with hazardous materials
- Ability to properly safety wire assemblies and connectors
- Ability to solder and repair cables and harnesses
- Basic knowledge of Microsoft Office suite of programs
- High school diploma
- Knowledge of solder certification to J-STD-001, IPC-7711/IPC-7721
- Knowledge of fault isolation for electro-mechanical components
- Knowledge of concepts for hardware repair
- Experience with CCA component rework and repair
- Rework experience with BGAs and electrical maintenance and rework