
ENGINEER/SCIENTIST
- You will conduct Weapon Control Systems system integration efforts, including developing embedded software and hardware, integrating electronic systems, troubleshooting, and data analysis for new and existing weapon control systems.
- You will develop and support GUIs using C#, Java, and C++.
- You will support installation and assessment of embedded systems locally and at external locations.
- You will provide leadership through mentoring, supporting Weapon Control System processes and collaborating across all functional areas within the organization and among external stakeholders.
- You will debug and troubleshoot hardware-software interfaces at a low level using tools, such as an oscilloscope, logic analyzer, etc.
- You will write test cases, unit tests and validate hardware-software integration.
- You will be conducting network stack integration and socket programming using your knowledge of the Transmission Control Protocol/Internet Protocol (TCP/IP) suite.
- You will diagnose and resolve network-related issues, including network configuration, connectivity, and data transmission problems.
Requirements
Conditions of Employment
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This is a Cyberspace Workforce position, work role code Software Developer, proficiency level Basic the incumbent is required to obtain and maintain qualifications in DoDM 8140.03 Cyber Workforce Qualification and Department of Navy policies.
- This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
Qualifications
In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the next lower pay band, ND-03 (GS-09/11 equivalency), in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: As a professional engineer or scientist developing embedded software and hardware, integrating electronic systems, troubleshooting, and performing data analysis to ensure effective systems performance and embedded software deployment.
Additional qualification information can be found from the following Office of Personnel Management website:
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet at least one of the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
- Professional Engineering Series (08XX) - Degree: A professional engineering degree from an ABET-accredited college or university; OR a degree with curriculum in differential and integral calculus, with additional courses in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics; or electronics; OR
- Professional Engineering Series (08XX) - Substitution of Education/Experience: A combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering; and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (a) professional registration, (b) evidence of successfully passing the Engineer-in-Training (EIT) examination; (c) successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified above; or (d) successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering provided that it included at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. (Note to Applicants: Please see the Qualifications & Education sections of this announcement for a link to the Office of Personnel Management (OPM) Individual Occupational Requirements. OPM guidance indicates that there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience. This training plan or experience must be well documented and provided at time of application.); OR
- 1310 - Physics Series: A degree physics or a related degree that included at least 24 semester hours in physics; or a combination of education and experience -- courses equivalent to a major in physics totaling at least 24 semester hours, plus appropriate experience or additional education. The courses must have included a fundamental course in general physics and, in addition, courses in any two of the following: electricity and magnetism, heat, light, mechanics, modern physics, and sound. OR
- 1515-Operations Research Series: A degree in operations research; or a related degree that included at least 24 semester hours in a combination of operations research, mathematics, probability, statistics, mathematical logic, science, or subject-matter courses. At least 3 of these 24 semester hours must have been in calculus; OR
- 1520-Mathematics Series: A degree in mathematics; or a combination of education and experience - courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics), plus appropriate experience or additional education. The total coursework described above must have included differential and integral calculus and, in addition, four advanced mathematics courses requiring calculus or equivalent mathematics courses as a prerequisite; OR
- 1550-Computer Science Series: A degree in computer science; or a degree with at least 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of these 30 semester hours must have been in a combination of statistics and mathematics that included differential and integral calculus.
Additional information
This position is covered by the Department of Defense Priority Placement Program.
Several vacancies may be filled.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: .
Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.
- Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. .
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Conditions of Employment
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This is a Cyberspace Workforce position, work role code Software Developer, proficiency level Basic the incumbent is required to obtain and maintain qualifications in DoDM 8140.03 Cyber Workforce Qualification and Department of Navy policies.
- This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
Qualifications
In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the next lower pay band, ND-03 (GS-09/11 equivalency), in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: As a professional engineer or scientist developing embedded software and hardware, integrating electronic systems, troubleshooting, and performing data analysis to ensure effective systems performance and embedded software deployment.
Additional qualification information can be found from the following Office of Personnel Management website:
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet at least one of the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
- Professional Engineering Series (08XX) - Degree: A professional engineering degree from an ABET-accredited college or university; OR a degree with curriculum in differential and integral calculus, with additional courses in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics; or electronics; OR
- Professional Engineering Series (08XX) - Substitution of Education/Experience: A combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering; and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (a) professional registration, (b) evidence of successfully passing the Engineer-in-Training (EIT) examination; (c) successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified above; or (d) successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering provided that it included at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. (Note to Applicants: Please see the Qualifications & Education sections of this announcement for a link to the Office of Personnel Management (OPM) Individual Occupational Requirements. OPM guidance indicates that there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience. This training plan or experience must be well documented and provided at time of application.); OR
- 1310 - Physics Series: A degree physics or a related degree that included at least 24 semester hours in physics; or a combination of education and experience -- courses equivalent to a major in physics totaling at least 24 semester hours, plus appropriate experience or additional education. The courses must have included a fundamental course in general physics and, in addition, courses in any two of the following: electricity and magnetism, heat, light, mechanics, modern physics, and sound. OR
- 1515-Operations Research Series: A degree in operations research; or a related degree that included at least 24 semester hours in a combination of operations research, mathematics, probability, statistics, mathematical logic, science, or subject-matter courses. At least 3 of these 24 semester hours must have been in calculus; OR
- 1520-Mathematics Series: A degree in mathematics; or a combination of education and experience - courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics), plus appropriate experience or additional education. The total coursework described above must have included differential and integral calculus and, in addition, four advanced mathematics courses requiring calculus or equivalent mathematics courses as a prerequisite; OR
- 1550-Computer Science Series: A degree in computer science; or a degree with at least 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of these 30 semester hours must have been in a combination of statistics and mathematics that included differential and integral calculus.
Additional information
This position is covered by the Department of Defense Priority Placement Program.
Several vacancies may be filled.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: .
Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.