PRINCIPAL TECHNICAL MANAGER FOR RESEARCH AND ENGINEERING DEPARTMENT
- You will serve as the principal advisor and technical leader for shaping the research, development, science, technology and engineering associated with energetic materials and their use in ordnance systems.
- You will guide, prioritize, and oversee the full range of research, technology development, acquisition, integration, in-service engineering, and ordnance assessment efforts to rapidly provide and deploy combat capability to the Nation’s warfighters.
- You will provide expert technical and program advice for all areas of Research and Technology, and Systems Engineering related to energetics across the NAVSEA, Office of Naval Research (ONR), and the Navy.
- You will provide expert guidance and direction to sponsors and stakeholders for the Department of the Navy, Department of Defense, other government agencies, academia, and industry on research, development and engineering of ordnance technologies.
- You will serve as a consultant and expert advisor focused on increasing mutual understanding of emerging technologies and opportunities, fleet requirements, and more effective collaboration between warfare centers, academia, and industry.
- You will serve as the Department Head of the Research and Engineering Department, providing leadership and technical direction, as well as administrative supervision to employees in the department.
Requirements
Conditions of Employment
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
- This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- Supervisors in the executive branch have heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.
Qualifications
1. Expert knowledge of weapons technology to include the areas of: (1) warheads and component technologies (energetics, fuzzing), (2) advanced diagnostics, modeling and simulation, (3) weapon system development and transition (design, build, test).
2. Expert knowledge in weapon system qualification, performance characterization, in-service engineering, ordnance assessment and an overall understanding of 6.1 - 6.7 of energetic systems transitions ordnance development from basic research to demilitarization.
3. Expert knowledge in weapon system usage, to include tactics and implementation, theater constraints, fleet needs and gap areas, weapon system platforms and general tactical doctrine.
4. Demonstrated subject matter expert (SME) in the field of energetics research, design/development, prototyping, in-service engineering/ordnance assessment (specific areas of expertise could include the following: organic synthesis of energetics, materials science & advanced fuels, formulations development & scale-up, polymer chemistry, improvised threats and munitions, Shock Physics Research, Advanced Diagnostics, Formulation Testing, Rocket Fuel Development, Reactive Material Research, Modeling & Simulation (M&S), Inorganic chemistry and new materials development, Reactive Materials development and characterization, Materials processing and testing, Advanced Fuels development).
5. Experience as a technical expert and consultant across areas associated with R & D and engineering of energetic materials.
6. Ability to develop and analyze future war-fighting concepts and capabilities.
7. Knowledge of energetic test and evaluation.
Additional qualification information can be found from the following Office of Personnel Management website:
AND
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
For 0801 Professional Engineering Series:
A. Degree: Engineering. Successful completion of a bachelor's or higher engineering degree from an accredited college or university. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
-or-
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
(I) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions; or
(II) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or
(III) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A; or
(IV) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
For 1301 General Physical Sciences Series:
Successful completion of a degree in physical science, engineering, or mathematics that includes 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics;
-or-
a combination of education and experience in one of the above majors that includes at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.
For 1501 Mathematics Series:
Successful completion of a degree in mathematics, statistics, or actuarial science;
-or-
a combination of education and experience demonstrated by coursework that is equivalent to a major in mathematics, statistics, or actuarial science (at least 24 semester hours), plus appropriate experience or additional education.
An advanced degree of Master's or Ph.D. in one of the educational fields listed above is highly desirable.
Additional information
Senior Scientific Technical Manager (SSTM) positions are positions which exceed the ND-05 (GS-15 equivalent). SSTMs provide a continuity of technical leadership and oversight that is needed to ensure long term stewardship of an organization's technical capabilities. Typically, applicants for SSTM positions are expected to have a graduate degree, significant research or development experience, and a national or international reputation in his/her field and are recognized throughout the applicable community as a renowned expert. SSTM positions are in the competitive service.
This announcement is being used to recruit qualified individuals, under the STRL Direct Hire Authority, authorized by Section 1108 of the NDAA for FY 2009 for qualified candidates possessing an advanced degree to scientific and engineering positions, and Federal Register Notice (FRN), Volume 79 Number 144, dated 28 July 2014. An advanced degree is a Master's or higher degree from an accredited college or university in a field of scientific or engineering study directly related to the duties of the position to be filled.
This announcement is also being used to recruit qualified individuals under the STRL Direct Hire Authority, authorized by Section 1107 of the NDAA for FY 2014 for qualified candidates who possess a Bachelors' degree to scientific and engineering positions.
The Rule of Three, Veteran's Preference and traditional rating and ranking of applicants do not apply to the Direct Hire process.
This position is not covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at:
Veteran's preference does not apply when selecting individuals under the specific hiring authority addressed in this announcement. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.
- Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. .
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Conditions of Employment
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
- This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- Supervisors in the executive branch have heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.
Qualifications
1. Expert knowledge of weapons technology to include the areas of: (1) warheads and component technologies (energetics, fuzzing), (2) advanced diagnostics, modeling and simulation, (3) weapon system development and transition (design, build, test).
2. Expert knowledge in weapon system qualification, performance characterization, in-service engineering, ordnance assessment and an overall understanding of 6.1 - 6.7 of energetic systems transitions ordnance development from basic research to demilitarization.
3. Expert knowledge in weapon system usage, to include tactics and implementation, theater constraints, fleet needs and gap areas, weapon system platforms and general tactical doctrine.
4. Demonstrated subject matter expert (SME) in the field of energetics research, design/development, prototyping, in-service engineering/ordnance assessment (specific areas of expertise could include the following: organic synthesis of energetics, materials science & advanced fuels, formulations development & scale-up, polymer chemistry, improvised threats and munitions, Shock Physics Research, Advanced Diagnostics, Formulation Testing, Rocket Fuel Development, Reactive Material Research, Modeling & Simulation (M&S), Inorganic chemistry and new materials development, Reactive Materials development and characterization, Materials processing and testing, Advanced Fuels development).
5. Experience as a technical expert and consultant across areas associated with R & D and engineering of energetic materials.
6. Ability to develop and analyze future war-fighting concepts and capabilities.
7. Knowledge of energetic test and evaluation.
Additional qualification information can be found from the following Office of Personnel Management website:
AND
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
For 0801 Professional Engineering Series:
A. Degree: Engineering. Successful completion of a bachelor's or higher engineering degree from an accredited college or university. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
-or-
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
(I) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions; or
(II) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or
(III) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A; or
(IV) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
For 1301 General Physical Sciences Series:
Successful completion of a degree in physical science, engineering, or mathematics that includes 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics;
-or-
a combination of education and experience in one of the above majors that includes at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.
For 1501 Mathematics Series:
Successful completion of a degree in mathematics, statistics, or actuarial science;
-or-
a combination of education and experience demonstrated by coursework that is equivalent to a major in mathematics, statistics, or actuarial science (at least 24 semester hours), plus appropriate experience or additional education.
An advanced degree of Master's or Ph.D. in one of the educational fields listed above is highly desirable.
Additional information
Senior Scientific Technical Manager (SSTM) positions are positions which exceed the ND-05 (GS-15 equivalent). SSTMs provide a continuity of technical leadership and oversight that is needed to ensure long term stewardship of an organization's technical capabilities. Typically, applicants for SSTM positions are expected to have a graduate degree, significant research or development experience, and a national or international reputation in his/her field and are recognized throughout the applicable community as a renowned expert. SSTM positions are in the competitive service.
This announcement is being used to recruit qualified individuals, under the STRL Direct Hire Authority, authorized by Section 1108 of the NDAA for FY 2009 for qualified candidates possessing an advanced degree to scientific and engineering positions, and Federal Register Notice (FRN), Volume 79 Number 144, dated 28 July 2014. An advanced degree is a Master's or higher degree from an accredited college or university in a field of scientific or engineering study directly related to the duties of the position to be filled.
This announcement is also being used to recruit qualified individuals under the STRL Direct Hire Authority, authorized by Section 1107 of the NDAA for FY 2014 for qualified candidates who possess a Bachelors' degree to scientific and engineering positions.
The Rule of Three, Veteran's Preference and traditional rating and ranking of applicants do not apply to the Direct Hire process.
This position is not covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at:
Veteran's preference does not apply when selecting individuals under the specific hiring authority addressed in this announcement. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.