Utility Systems Repairer-Operator
- Installing, diagnosing, and making repairs on domestic and commercial refrigeration and air conditioning units and systems such as walk-in coolers, refrigerators, evaporative coolers, attic and evaporative fans, and other equipment of comparable complexity.
- Installing, repairing, and maintaining domestic heating equipment and systems such as oil fueled heaters, hot air furnaces, heating boilers, and other systems and equipment.
- Servicing mechanical equipment such as valves, compressors, motors, centrifugal, macerator, and air lift pumps, automatic controls such as electrical relays, time delay switches, and pump start-stop switches.
- Fabricating, installing, modifying, maintaining, and/or repairing electronically controlled industrial equipment such as Supervisory Control and Data Acquisition Systems (SCADA), Distributed Control Systems (DCS), Programmable Logic Controller (PLC), Uninterruptible Power Supply (UPS), Proportional, Integral, and Derivative Control (PID), Telemetry Systems, Remote Terminal Units (RTU), Transducers, and Software Products.
Requirements
Conditions of Employment
- U.S. Citizenship required.
- Appointment subject to background investigation and favorable adjudication.
- Meet Selective Service Registration Act requirement for males
- Selectee will be required to participate in the Direct Deposit Electronics Funds Transfer Program.
- You will be required to operate a government (or private) motor vehicle as part of your official duties; a valid driver's license is required. You will be required to submit a Motor Vehicle Operator's License and Driving Record. You must also submit (within a State sealed envelope or submitted directly by the State authorities), and at your own expense, all certified driving records from all States that disclose all valid driver's licenses, whether current or past, possessed by you.
- You will be required to wear a uniform and comply with the National Park Service uniform standards. A uniform allowance will be provided.
- You may be required to work weekends, holidays and overtime.
- You may be required to travel overnight away from home up to 3 nights per month.
- Government Charge Card: You may be required to complete training and obtain/maintain a government charge card with travel and/or purchase authority.
Qualifications
- Ability To Do The Work Of The Position Without More Than Normal Supervision (SCREEN OUT)
- Knowledge of Equipment Assembly, Installation, Repair, etc.
- Technical Practices (theoretical, precise, artistic)
- Use of Measuring Instruments
- Ability To Interpret Instructions, Specification, etc. (includes blueprinting reading)
- Ability To Use and Maintain Tools and Equipment
- Knowledge of Materials
Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
There is no substitution of education for experience for Wage Grade (WG) positions.
Additional Information -
Current and former Federal employees with status, or who are reinstatement eligible; veterans eligible under the VEOA authority, or who are 30% or more disabled; applicants eligible under special appointing authorities such as individuals with targeted disabilities, certain military spouses, former Peace Corps and Vista Volunteers, etc. For more information, select the following link(s): 1) , 2) , and/or 3) .
Documentation for the eligibility, submission of ALL SF-50s and performance information for each period of temporary/term employment that qualifies for LMWFA. Performance documentation can be obtained by contacting the supervisors for the positions you served in during your 24 months. If they did not complete performance appraisals ask them to provide a statement of performance for each period of service. The statement must specify the dates for each employment period and your level of performance (dates should match the dates on the SF-50s).
Current surplus and current or former displaced Federal individuals who have special priority selection rights under the Agency Career Transition Assistance Program (CTAP) or the Interagency Career Transition Assistance Program (ICTAP) must be well qualified for the position to receive consideration for special priority selection. Well qualified means that the applicant meets the following: OPM qualification standards for the position; all selective placement factors, where applicable; special qualifying conditions that OPM has approved for the position, where applicable; is physically qualified with reasonable accommodation, where appropriate to satisfactorily perform the duties of the position upon entry; and is rated by the organization at least at the well qualified level on all competencies. Federal employees seeking CTAP/ICTAP eligibility must submit proof that they meet the requirements of 5 CFR 330.605(2) for CTAP and 5 CFR 330.704 for ICTAP. This includes a copy of the agency notice, a copy of their most recent Performance Rating, and a copy of their most recent SF-50 noting current position, grade level, and duty location. Please annotate your application to reflect that you are applying as a CTAP/ICTAP eligible. If you are selected for Federal employment, you will be required to fill out a Declaration of Federal Employment, OF-306, prior to being appointed to determine your suitability for Federal employment and to authorize a background investigation. Failing to answer all questions truthfully and completely or providing false statements on your application may be grounds for not hiring you, or for firing you after you begin work. Also, you may be punished by fine or imprisonment (U.S. Code, Title 18, section 1001).
Additional information
This announcement may be used to fill additional positions if identical vacancies occur within 90 days of the issue date of the referral certificate.
A Recruitment Incentive May Be Authorized for a newly selected employee when appointed to a permanent, temporary, or term position. A Federal employee who is transferring to the National Park Service from another component, bureau or Federal agency and who does not meet the conditions under 5 CFR §575.102 is not eligible for a recruitment incentive.
A Relocation Incentive May Be Authorized for a Federal employee when the employee must move, as directed by the National Park Service (NPS) either through a management directed reassignment or selection for employment, to a different location at least 50 miles away from the one where his/her position of record held at time of selection is currently located, due to a need of the NPS. A relocation incentive is not the same as a Permanent Change of Station (PCS) move and, as such, may be granted in conjunction with one another.
Physical Demands: Work assignments typically require moderately heavy physical effort to lift, carry, or otherwise handle items typically weighing up to 40 pounds. Duties require the incumbent to maneuver into and out of specific locations while dismantling and assembling utility related equipment. The incumbent makes repairs and installations from ladders, scaffolding, and platforms where the parts of systems worked on are in hard-to reach places. Frequent standing, walking, bending, crouching, reaching, and stooping is typical. Occasionally, climbing and work in high places may be required, as well as the use of hoists, holders, and pulleys when handling large equipment.Working Conditions: Work is both indoors and outdoors where the incumbent may be subject to prevailing weather conditions. The incumbent may be exposed to biological hazards or diseases while cleaning equipment or shoveling sludge, and hazardous gases such as methane, chlorine, hydrogen sulfide, and carbon monoxide. The incumbent may also be subject to electrical shock, loud noises, acids, and hydraulic fluids while working around motors and pumps. There is exposure to shock, burns, and strains. The incumbent follows prescribed safety practices and uses safety equipment such as face shields, gloves, hard-toe shoes, respirators, and protective clothing that may be uncomfortable to wear. The incumbent is required to attend and participate in safety meetings and training and review and follow safety regulations and policies prior to using Personal Protective Equipment (PPE) such as goggles, rubber mats, gloves, hard hats and respirators as the jobs require. The incumbent may be required to operate motor vehicles and heavy engineering equipment.
- Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. .
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Conditions of Employment
- U.S. Citizenship required.
- Appointment subject to background investigation and favorable adjudication.
- Meet Selective Service Registration Act requirement for males
- Selectee will be required to participate in the Direct Deposit Electronics Funds Transfer Program.
- You will be required to operate a government (or private) motor vehicle as part of your official duties; a valid driver's license is required. You will be required to submit a Motor Vehicle Operator's License and Driving Record. You must also submit (within a State sealed envelope or submitted directly by the State authorities), and at your own expense, all certified driving records from all States that disclose all valid driver's licenses, whether current or past, possessed by you.
- You will be required to wear a uniform and comply with the National Park Service uniform standards. A uniform allowance will be provided.
- You may be required to work weekends, holidays and overtime.
- You may be required to travel overnight away from home up to 3 nights per month.
- Government Charge Card: You may be required to complete training and obtain/maintain a government charge card with travel and/or purchase authority.
Qualifications
- Ability To Do The Work Of The Position Without More Than Normal Supervision (SCREEN OUT)
- Knowledge of Equipment Assembly, Installation, Repair, etc.
- Technical Practices (theoretical, precise, artistic)
- Use of Measuring Instruments
- Ability To Interpret Instructions, Specification, etc. (includes blueprinting reading)
- Ability To Use and Maintain Tools and Equipment
- Knowledge of Materials
Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
There is no substitution of education for experience for Wage Grade (WG) positions.
Additional Information -
Current and former Federal employees with status, or who are reinstatement eligible; veterans eligible under the VEOA authority, or who are 30% or more disabled; applicants eligible under special appointing authorities such as individuals with targeted disabilities, certain military spouses, former Peace Corps and Vista Volunteers, etc. For more information, select the following link(s): 1) , 2) , and/or 3) .
Documentation for the eligibility, submission of ALL SF-50s and performance information for each period of temporary/term employment that qualifies for LMWFA. Performance documentation can be obtained by contacting the supervisors for the positions you served in during your 24 months. If they did not complete performance appraisals ask them to provide a statement of performance for each period of service. The statement must specify the dates for each employment period and your level of performance (dates should match the dates on the SF-50s).
Current surplus and current or former displaced Federal individuals who have special priority selection rights under the Agency Career Transition Assistance Program (CTAP) or the Interagency Career Transition Assistance Program (ICTAP) must be well qualified for the position to receive consideration for special priority selection. Well qualified means that the applicant meets the following: OPM qualification standards for the position; all selective placement factors, where applicable; special qualifying conditions that OPM has approved for the position, where applicable; is physically qualified with reasonable accommodation, where appropriate to satisfactorily perform the duties of the position upon entry; and is rated by the organization at least at the well qualified level on all competencies. Federal employees seeking CTAP/ICTAP eligibility must submit proof that they meet the requirements of 5 CFR 330.605(2) for CTAP and 5 CFR 330.704 for ICTAP. This includes a copy of the agency notice, a copy of their most recent Performance Rating, and a copy of their most recent SF-50 noting current position, grade level, and duty location. Please annotate your application to reflect that you are applying as a CTAP/ICTAP eligible. If you are selected for Federal employment, you will be required to fill out a Declaration of Federal Employment, OF-306, prior to being appointed to determine your suitability for Federal employment and to authorize a background investigation. Failing to answer all questions truthfully and completely or providing false statements on your application may be grounds for not hiring you, or for firing you after you begin work. Also, you may be punished by fine or imprisonment (U.S. Code, Title 18, section 1001).
Additional information
This announcement may be used to fill additional positions if identical vacancies occur within 90 days of the issue date of the referral certificate.
A Recruitment Incentive May Be Authorized for a newly selected employee when appointed to a permanent, temporary, or term position. A Federal employee who is transferring to the National Park Service from another component, bureau or Federal agency and who does not meet the conditions under 5 CFR §575.102 is not eligible for a recruitment incentive.
A Relocation Incentive May Be Authorized for a Federal employee when the employee must move, as directed by the National Park Service (NPS) either through a management directed reassignment or selection for employment, to a different location at least 50 miles away from the one where his/her position of record held at time of selection is currently located, due to a need of the NPS. A relocation incentive is not the same as a Permanent Change of Station (PCS) move and, as such, may be granted in conjunction with one another.
Physical Demands: Work assignments typically require moderately heavy physical effort to lift, carry, or otherwise handle items typically weighing up to 40 pounds. Duties require the incumbent to maneuver into and out of specific locations while dismantling and assembling utility related equipment. The incumbent makes repairs and installations from ladders, scaffolding, and platforms where the parts of systems worked on are in hard-to reach places. Frequent standing, walking, bending, crouching, reaching, and stooping is typical. Occasionally, climbing and work in high places may be required, as well as the use of hoists, holders, and pulleys when handling large equipment.Working Conditions: Work is both indoors and outdoors where the incumbent may be subject to prevailing weather conditions. The incumbent may be exposed to biological hazards or diseases while cleaning equipment or shoveling sludge, and hazardous gases such as methane, chlorine, hydrogen sulfide, and carbon monoxide. The incumbent may also be subject to electrical shock, loud noises, acids, and hydraulic fluids while working around motors and pumps. There is exposure to shock, burns, and strains. The incumbent follows prescribed safety practices and uses safety equipment such as face shields, gloves, hard-toe shoes, respirators, and protective clothing that may be uncomfortable to wear. The incumbent is required to attend and participate in safety meetings and training and review and follow safety regulations and policies prior to using Personal Protective Equipment (PPE) such as goggles, rubber mats, gloves, hard hats and respirators as the jobs require. The incumbent may be required to operate motor vehicles and heavy engineering equipment.